| DTC Strategy |
|
- Poor connector connection
- Faulty signal circuit of front-RH wheel speed sensor
- Faulty wheel speed sensor front-RH
|
| Enable Condition |
- Ignition switch "ON" & Engine "ON"
- Continuous monitoring at vehicle speed over 40km/h (Approx. 25mph)
- No related DTC is stored
|
| Threshold Value |
- 2.75 km/h (Approx. 1.7 mph) signal of front RH wheel speed sensor is detected while driving vehicle with over 40 km/h (Approx. 25 mph)
- Abnormal wheel speed change is detected
|
| Detecting Time |
|
| Warning Lamp |
- In case of failure on one wheel
- ABS/ESC (ESP) Warning Indicator Lamp "ON"
- In case of failure on more than two wheels
- EBD/ABS/ESC (ESP) Warning Indicator Lamp "ON"
|
| Disable Condition |
- Ignition "OFF" and then "ON" and vehicle speed over 12 km/h (Approx. 7 mph)
|
| Failsafe |
- Wheel speed sensor failure is detected while ABS/ESC (ESP) is not in control: Control function prohibited
|