DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN Communication Monitoring	Poor Connector Connection Defected B-CAN Communication Circuit
Enable Condition	Normal Battery Voltage
Threshold Value	B-CAN BUS OFF is detected
Recovery Condition	Clear with KDS/GDS after problem is fixed
Recovery Time	1000ms

NO.	Stop charging condition	Recovery condition	Indicator
1	Door open	Door close	LED OFF
2	No smart key	Smart key detected	LED OFF
3	Foreign object detection	No foreign object	LED Flash
4	Over current greater than 4.5A	Normal current	LED Flash
5	Internal temp. greater than 70°C (158°F)	Internal temp. less than 60°C (140°F)	LED Flash
6	ACC Off	Ignition switch On or ACC On	LED OFF