LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Check point (Warning indicator)
    NO Ref Symbol Color Name Signal Input Signal Control (Unit/Sensor) Check Point
    1
    G11952187
    		 Green Turn Left C-CAN BCM
    1. CAN line failure
    2
    G11952188
    		 Green Turn Right C-CAN
    3
    G11952189
    		 Green Front Fog C-CAN BCM
    1. CAN line failure
    4
    G11952190
    		 Yellow Rear Fog C-CAN BCM
    1. CAN line failure
    5
    G11952191
    		 Blue High Beam C-CAN BCM
    1. CAN line failure
    6
    G11952192
    		 Green Low Beam C-CAN BCM
    1. CAN Line failure
    7
    G11952193
    		 Green Tail Lamp C-CAN BCM
    1. CAN Line failure
    8
    G11952194
    		 Green Cruise C-CAN EMS
    1. CAN line failure
    9
    G11952195
    		 Green SET C-CAN EMS
    1. CAN line failure
    10
    G11952196
    		 Red Seat Belt C-CAN BCM
    1. CAN line failure
    11
    G11952197
    		 Red Air Bag C-CAN ACU
    1. CAN line failure
    12
    G11952198
    		 Yellow Trunk Open C-CAN BCM
    1. CAN line failure
    13
    G11952199
    		 Red Door Open C-CAN BCM
    1. CAN line failure
    14
    G11952200
    		 Red High Temperature (SVC only) C-CAN EMS
    1. CAN line failure
    15
    G11952201
    		 Yellow Immobilizer C-CAN Hardwire SMK
    1. CAN line failure
    2. Wiring failure
    16
    G11952202
    		 Yellow ABS C-CAN ESC
    1. CAN line failure
    17
    G11952203
    		 Red Key out (STD only) C-CAN SMK
    1. CAN line failure
    8
    G11952204
    		 Yellow ESC C-CAN ESC
    1. CAN line failure
    19
    G11952205
    		 Yellow ESC OFF C-CAN ESC
    1. CAN line failure
    20
    G11952206
    		 Yellow TPMS (Tread & Fail) C-CAN TPMS
    1. CAN line failure
    21
    G11952207
    		 Yellow Fuel Low Hardwire Fuel Sender
    1. Fuel sender failure
    2. Wiring failure
    22
    G11952208
    		 Red Parking Brake C-CAN BCM
    TCS
    EPB
    1. CAN line failure
    23
    G11952209
    		 Red Oil Pressure Hardwire Oil Pressure Sensor
    1. Wiring failure
    24
    G11952210
    		 Yellow Check fuel cap C-CAN EMS
    1. CAN line failure
    25
    G11952211
    		 Red Battery Charge Hardwire Battery Sensor
    1. Wiring failure
    26
    G11952212
    		 Yellow Check Engine C-CAN EMS
    1. CAN line failure
    27
    G11952213
    		 Yellow Low Washer Hardwire Water Level Sensor
    1. Wiring failure
    28
    G11952214
    		 Green Active ECO Hardwire ECO ON/OFF Switch
    1. Switch failure
    2. Wiring failure
    29
    G11952215
    		 Yellow Panorama sunroof open Hardwire Panorama sunroof switch
    1. Wiring failure
    30
    G11952216
    		 Red MDPS C-CAN MDPS
    1. MDPS unit failure
    2. CAN line failure
    31
    G11952217
    		 Green Auto Stop C-CAN EMS
    1. CAN line failure
    G11952218
    		 Yellow Auto Stop C-CAN EMS
    1. CAN line failure
    32
    G11952219
    		 White Normal C-CAN MDPS
    1. CAN line failure
    33
    G11952220
    		 Amber Sport C-CAN MDPS
    1. CAN line failure
    34
    G11952221
    		 Green Comfort C-CAN MDPS
    1. CAN line failure
  2. Check point (Gauge)
    No. Name Signal Input Signal Control (Unit/Sensor) Check Point
    1 Speedometer C-CAN (A/T), Hardwire (M/T) TCU (A/T), Vehicle speed sensor (M/T)
    1. CAN Line failure (A/T)
    2. Wiring failure (M/T)
    2 Tachometer C-CAN EMS
    1. CAN Line failure
    3 Cooling water temperature C-CAN EMS
    1. CAN Line failure
    4 Fuel Hardwire Fuel sender
    1. Fuel sender failure
    2. Wiring failure
    5 Shift indicator C-CAN TCU
    1. CAN Line failure
  3. Check the specified value of cluster connector in specified condition.
    No. Description Input/Output Communication Value (V) Specified conditions
    A1 Ground signal 3 Input Hardwire ~ 1 Always
    A2 Illumination output (-) Output Hardwire ~ 1 Always
    A3 Rheostat up switch input Input Hardwire ~ 2.7 IGN switch ON, Illumination UP
    A4 Rheostat down switch input Input Hardwire ~ 2.7 IGN switch ON, Illumination DOWN
    A5 Detent output Output Hardwire 6 ~ 15 IGN ON & rheostat up to max position
    A6 P output Output Hardwire 6 ~ 15 IGN ON & shift the lever in P
    A7 R output Output Hardwire 6 ~ 15 IGN ON & shift the lever in R
    A8 N output Output Hardwire 6 ~ 15 IGN ON & shift the lever in N
    A9 D output Output Hardwire 6 ~ 15 IGN ON & shift the lever in D
    A10 S output Output Hardwire 6 ~ 15 IGN ON & shift the lever in S
    A11 ALT L output Onput Hardwire ~ 2.7 IGN switch ON, warning lamp ON
    A12 ALT L input (-) (Battery charge) Input Hardwire ~ 1.5 IGN switch ON, charge switch ON
    A13 -        
    A14 Fuel sender (+) input Input Hardwire ~ 1.3
    7.68 ~    		 Gauge is FULL
    Gauge is EMPTY
    A15 Airbag (+) input Input CAN -  
    A16 Fuel sender (-) input Input Hardwire ~ 1 Always
    A17 Immobilizer input Input Hardwire ~ 1 IGN switch ON, warning lamp ON
    A18 Speed output (4P output) Output Hardwire ~ 1.2 IGN switch ON, vehicle speed over 1 KM/H
    A19 LDC (Battery (+)) input Input Hardwire   IGN Switch ON
    A20 Tail lamp input (Illumination (+)) Input Hardwire 9 ~ 16 Tail lamp switch ON
    A21 Trip switch (-) input Input Hardwire ~ 1 Always
    A22 Trip switch 1 (+) input (Trip button) Input Hardwire Trip switch input power IGN switch ON & control the trip switch
    A23 Trip switch 2 (+) input (Cruise button) Input Hardwire Trip switch input power IGN switch ON & control the trip switch
    A24 Speed input (-) Input Hardwire   IGN Switch ON
    A25 -        
    A26 Low washer level input (-) Input Hardwire ~ 2.7 IGN ON & warning lamp turn ON
    A27 Oil pressure switch input (-) Input Hardwire ~ 2.7 IGN switch ON, warning lamp ON
    A28 -        
    A29 -        
    A30 -        
    A31 -        
    A32 C CAN high Input CAN -  
    A33 C CAN low Input CAN -  
    A34 -        
    A35 -        
    A36 Active ECO switch input Input Hardwire ~ 2.7 IGN switch ON, ACTIVE ECO switch ON, warning lamp ON
    A37 Ground signal 1 Input Hardwire ~ 1 Always
    A38 R input (M/T) Input Hardwire 9 ~ 16 IGN switch ON
    A39 Ignition 1 Input Hardwire 9 ~ 16 IGN switch ON
    A40 Battery (+) Input Hardwire 9 ~ 16 Always
  4. Communication information with another units.
    Transmission Reception Communication Remarks
    Cluster BCM C-CAN Fuel supply signal
    Instantaneous fuel consumption
    LFW lamp ON signal
    Vehicle setting
    Illumination setting
    Cluster EMS C-CAN Active ECO mode
    Cluster MDPS C-CAN Flex steering switch
    Cluster ACU C-CAN Air bag
    ACU Cluster CAN Air bag warning control
    BCM Cluster CAN Hood warning
    FATC Cluster CAN Outside temperature
    EMS Cluster CAN Tachometer control
    Temperature gauge control
    Engine warning symbol, CRUISE, SET warning control, GSI (Gear Shift Indicator)
    ESC Cluster CAN Warning control
    BCM Cluster CAN Vehicle setting control
    Warning and buzzer indicate, PAS control
    SMK Cluster CAN Smart key indicate
    TCS Cluster CAN ESC OFF switch information
    TCU Cluster CAN Shift lever information (AT)
    TPMS Cluster CAN TPMS information
  5. The other information about the cluster
    1. USM (User Setting Mode)
      • USM is set using the steering wheel remote control button.
      • IMS seat, IMS steering, auto door lock/unlock, head lamp escort, welcome light, welcome sound and triple
      • turn signal lamp are controlled.
    2. USM setting procedure

      • (1)

        Send the USM value to the BCM

      • (2)

        BCM send the setting value to the each module through CAN.

      • (3)

        Each modules send the setting complete value to BCM.

      • (4)

        BCM send the final setting value to cluster through CAN.
scientia non olet · About LEMON Manuals