Steering Column Shroud Lower Panel

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the crash pad lower panel.
(Refer to "CRASH PAD LOWER PANEL .")
After loosening the mounting screws, then remove the steering column shroud lower panel (A) by using a screw driver.

Courtesy of
Install in the reverse order of removal.
Information
- Replace any damaged clips.