[Steering Column Shroud Lower Panel]

Information 

• When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
• Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
• Take care not to bend or scratch the trim and panels.

1. Separate the steering column shroud upper panel (A).
   Fig 1: Separating Steering Column Shroud Upper Panel

   Courtesy of KIA MOTORS AMERICA, INC.
2. Loosen mounting screws on both sides.

   [LH] 

   Fig 2: Loosening Mounting Screws On Both Sides (LH)

   Courtesy of KIA MOTORS AMERICA, INC.

   [RH] 

   Fig 3: Loosening Mounting Screws On Both Sides (RH)

   Courtesy of KIA MOTORS AMERICA, INC.
3. Loosen the mounting screw and remove the steering column shroud lower panel (A).
   Fig 4: Removing Steering Column Shroud Lower Panel

   Courtesy of KIA MOTORS AMERICA, INC.
4. Install in the reverse order of removal.

   Information 

   • Replace any damaged clips.