Repair Procedures: Replacement

CAUTION: Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

[LH]

Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

Fig 1: Removing Crash Pad Side Cover (LH)
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information

Replace any damaged clips.

[RH]

Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

Fig 2: Removing Crash Pad Side Cover (RH)
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information

Replace any damaged clips.