Room Lamp Replacement

CAUTION:

Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the room lamp cover (B).
After loosening the mounting screws, then remove the room lamp (A).

Fig 1: Locating Room Lamp And Room Lamp Cover With Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A).

Fig 2: Locating Room Lamp Connector
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connectors are connected in properly.
- Replace any damage clips.