LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Windshield Glass >> Interior Trim >> Repair Procedures >> Replacement >> Center Pillar Trim Replacement

Center Pillar Trim Replacement

CAUTION:
  • Put on gloves to protect your hands.
  • Use a plastic panel removal tool to remove interior trim pieces to without marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the following items:
    • Front door scuff trim
    • Rear door scuff trim
  2. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  3. The seat belt anchor pretensioner (A) can be removed after pushing the lock pin (B) as arrow direction.
    Fig 1: Pushing Lock Pin
    G11846323Courtesy of KIA MOTORS AMERICA, INC.
  4. Using a screwdriver or remover, remove the center pillar lower trim (A).
    Fig 2: Locating Center Pillar Lower Trim
    G11846324Courtesy of KIA MOTORS AMERICA, INC.
  5. Using a screwdriver or remover, remove the center pillar upper trim (A).
    Fig 3: Locating Center Pillar Upper Trim
    G11846325Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation is the reverse of removal.
    NOTE:
    • Replace any damage clips.