LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Fuel Filler Door - Inspection - Optima (Except HEV) >> Fuel Filler Door Release Actuator >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Remove the left luggage side trim.

    (Refer to TRUNK TRIM - OPTIMA (EXCEPT HEV) Body )

  2. Loosen two fuel filler actuator mounting bolts.
    Fig 1: Loosening Fuel Filler Actuator Mounting Bolts
    G11827876Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the fuel filler door release actuator (B) after disconnecting the fuel filler door release actuator connector (A).
    Fig 2: Locating Fuel Filler Door Release Actuator Connector
    G11827877Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Locating Fuel Filler Door Release Actuator
    G11827878Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between terminals No. 1 and No. 2. If there is no continuity, replace the fuel filler door release actuator (A).
Fig 4: Checking For Continuity Between Terminals No. 1 And 2
G11827879Courtesy of KIA MOTORS AMERICA, INC.