DTC P0092: Fuel Pressure Regulator 1 Control Circuit High: General Description
WARNING: This page is about a different variant/trim than selected.
The ECM operates the fuel pressure control valve with the signal from the fuel rail pressure sensor to control optimized RPM and rail pressure.
The high pressure pump adds high pressure to low pressure fuel from the low pressure pump. The fuel pressure regulator controls fuel pressure from 40 (4 MPa/580.15 psi) to 150 bar (15 MPa/2175.57 psi). Under the abnormal condition of high pressure fuel system, the ECM controls fuel system as low pressure.