LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 83 (Drive Belt System - 1.6L - Optima (Except HEV)) >> Drive Belt >> Repair Procedures >> Adjustment >> Drive belt tension measurement and adjustment >> Using a mechanical tension gauge

Using a mechanical tension gauge

WARNING: This page is about a different variant/trim than selected.
  1. While pressing the handle (A) of the gauge, insert the belt (B) between pulley and pulley (or idler) into the gap between spindle (C) and hook (D).
    Fig 1: Locating Tension Gauge Handle, Belt, Spindle And Hook
    G11822987Courtesy of KIA MOTORS AMERICA, INC.
  2. After releasing the handle (A), read a value on the dial pointed by the indicator (B).
Fig 2: Locating Tension Gauge Handle And Dial Value Indicator
G11822988Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals