LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 73 (Active Hydraulic Boost (AHB) System (HEV)) >> Rear Disc Brake >> Repair Procedures >> Inspection >> Rear Brake Pad Check

Rear Brake Pad Check

WARNING: This page is about a different variant/trim than selected.
  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad thickness 

    Standard value: 10 mm (0.393 in)

    Service limit: 2.0 mm (0.0787 in)

  2. Check that grease is applied, to sliding contact points. Check for metal damage to the pad and backing.
scientia non olet · About LEMON Manuals