Front brake disc thickness check
WARNING: This page is about a different variant/trim than selected.
- Check the brake pads for wear and fade.
- Check the brake disc for damage and cracks.
- Remove all rust and contamination from the surface, and measure the disc thickness at 8 points, at least, of same distance (5mm) from the brake disc outer circle.
Front brake disc thickness
- Standard: 28 mm (1.10 in)
- Service Limit: 26.4 mm (1.04 in)
Deviation: Less than 0.005mm (0.0002in)
- If wear exceeds the limit, replace the discs and pad assembly left and right of the vehicle.