LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Blower System (HEV)) >> Blower Motor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad lower cover (A).
    Fig 1: Removing Main Crash Pad Lower Cover (A)
    G11818546Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the connector (A) of the blower motor.
  4. Remove the blower motor (B) after loosening the mounting screws.
    Fig 2: Disconnecting (A) Connector And Removing Blower Unit
    G11818547Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse order of removal.