LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Trunk Lid >> Repair Procedures >> Replacement >> Trunk Lid Latch Replacement

Trunk Lid Latch Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the trunk lid trim.
  2. Disconnect the trunk lid latch connector (A).
  3. Disconnect the cable (B), then loosen the latch assembly (C) mounting bolts and remove.

    Tightening torque: 

    6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

    Fig 1: Loosening Latch Assembly Mounting Bolts
    G11816911Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the trunk lid locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals