Roll Blind Replacement: Removal

WARNING: This page is about a different variant/trim than selected.

After loosening the mounting screws, then remove the roll blind lower bracket (A).

Fig 1: Loosening Roll Blind Lower Bracket Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Remove the roll blind (A) by pulling it at a right angle.
CAUTION:
- When you are removing it, be careful that the roll blind edge (C) is up against the frame of the vehicle because it has tension on it.
Fig 2: Locating Roll Blind And Roll Blind Edge
Courtesy of KIA MOTORS AMERICA, INC.