LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Hood >> Repair Procedures >> Replacement >> Hood Release Handle Replacement

Hood Release Handle Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Using a screwdriver or remover, remove the hood release handle (A).
    Fig 1: Locating Hood Release Handle
    G11816901Courtesy of KIA MOTORS AMERICA, INC.
  2. Installation is the reverse of removal.
    NOTE:
    • Make sure the hood latch cable is connected properly.
    • Make sure the hood locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals