LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Hood >> Repair Procedures >> Replacement >> Hood Lift Replacement

Hood Lift Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Using a screwdriver (A), lift the socket clips (B) up slightly on both ends of the lifter (C), and then remove the lifter from the bracket (D).
    Fig 1: Using Screwdriver Lifting Socket Clips Of Lifter
    G11816898Courtesy of KIA MOTORS AMERICA, INC.
  2. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals