LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Hood >> Repair Procedures >> Replacement >> Hood Insulator Pad Replacement

Hood Insulator Pad Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).
    CAUTION:
    • Be careful not to scratch the hood panel.
    Fig 1: Detaching Hood Insulator Pad Clips
    G11816897Courtesy of KIA MOTORS AMERICA, INC.
  2. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals