LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Front Door >> Repair Procedures >> Replacements >> Power Window Motor Replacement

Power Window Motor Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front door trim.
  2. Disconnect the power window motor connector (B).
  3. After loosening the mounting screws, then remove the power window motor (A).
    Fig 1: Loosening Power Window Motor Mounting Screws
    G11816926Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Grease should be applied to areas where there is rotational parts and springs.
    • Roll the glass up and down to see if it moves freely without binding.
    • Replace any damaged clips.
    • Make sure the door locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals