LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Front Door >> Repair Procedures >> Replacements >> Door Trim Replacement

Door Trim Replacement

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Be careful not to scratch the door trim and other parts.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the front door quadrant inner cover (A).
    Fig 1: Removing Front Door Quadrant Inner Cover
    G11816917Courtesy of KIA MOTORS AMERICA, INC.
  2. After loosening the mounting screws, then remove the front door trim (A).
    Fig 2: Loosening Front Door Trim Mounting Screws
    G11816918Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the inside handle cage (A).
    Fig 3: Locating Inside Handle Cage Screw
    G11816919Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connectors (A).
    Fig 4: Locating Door Trim Connectors
    G11816920Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
    NOTE:
    • Make sure connectors are connected properly and each rod is connected securely.
    • Make sure the door locks/unlocks and opens/closes properly.
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals