LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Body Side Moulding >> Repair Procedures >> Replacement >> Side Sill Moulding Replacement

Side Sill Moulding Replacement

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  • Take care not to scratch the body surface.
  1. Loosen the mounting screws.
  2. Using a screwdriver or remover, remove the side sill moulding (A).
  3. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips
    Fig 1: Removing Side Sill Moulding
    G11816975Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals