LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Body Side Moulding >> Repair Procedures >> Replacement >> Rear Wheel Guard And Mud Guard Replacement

Rear Wheel Guard And Mud Guard Replacement

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged
  • Put on gloves to protect your hands.
  • Take care not to scratch the body surface.
  1. Remove the rear tire.
  2. After loosening the mounting clips and nut, then remove the rear wheel guard (A) and mud guard (B)

    RH 

    Fig 1: Locating Rear Wheel Guard And Mud Guard - RH
    G11816973Courtesy of KIA MOTORS AMERICA, INC.

    LH 

    Fig 2: Locating Rear Wheel Guard And Mud Guard - LH
    G11816974Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals