LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Exterior Body Panels (HEV)) >> Body Side Moulding >> Repair Procedures >> Replacement >> Front Wheel Guard And Mud Guard Replacement

Front Wheel Guard And Mud Guard Replacement

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged
  • Put on gloves to protect your hands.
  • Take care not to scratch the body surface.
  1. Remove the front tire.
  2. After loosening the mounting clips and screws, then remove the front wheel guard (A), mud guard (B).
    Fig 1: Locating Front Wheel Guard And Mud Guard
    G11816972Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.