LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 57 (Brake System - General Information (HEV)) >> Brake System >> Brake Bleeding Procedure >> AHB Brake System Bleeding Procedure >> Air Bleeding Tool Removal Procedure

Air Bleeding Tool Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. To remove the air bleeding tool (09580-3D100) from the vehicle, close the air shut-off valve (A) first.
    Fig 1: Locating Air Shut-Off Valve
    G11816728Courtesy of KIA MOTORS AMERICA, INC.
  2. Disconnect the air hose (B) from air bleeding tool (09580-3D100), then carefully open the air shut-off valve (A) slowly to bleed air out of the reservoir and air bleeding tool (09580-3D100).
    Fig 2: Locating Air Hose And Air Shut-Off Valve
    G11816729Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: To prevent backflow of brake fluid, be sure to open the air shut-off valve slowly then bleed air in the reservoir tank.
  3. Remove air bleeding tool (09580-3D100) and air bleeding tool cap (0k585-E8100) from the reservoir.
    Fig 3: Removing Air Bleeding Tool Cap
    G11816730Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the brake reservoir cap.
scientia non olet · About LEMON Manuals