Run out inspection
WARNING: This page is about a different variant/trim than selected.
- Jack up the vehicle.
- Measure the wheel Run-out by using a dial indicator as illustration below.
| Run-out |
Aluminum |
Steel |
| Radial mm(in.) |
Below 0.3(0.012) |
Below 1.4(0.055) |
| Lateral mm(in.) |
Below 0.3(0.012) |
Below 0.9(0.035) |
- If measured value exceeds the standard value, replace the wheel.
Courtesy of KIA MOTORS AMERICA, INC.