LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Interior Trim & Glass (HEV)) >> Interior Trim >> Repair Procedures >> Replacement >> Rear Pillar Trim Replacement

Rear Pillar Trim Replacement

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Put on gloves to protect your hands.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Using a screwdriver or remover, remove the rear pillar trim (A).
    Fig 1: Removing Rear Pillar Trim
    G11817133Courtesy of KIA MOTORS AMERICA, INC.
  2. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.