LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Interior Trim & Glass (HEV)) >> Crash Pad >> Repair Procedures >> Replacement >> Crash Pad Side Cover Replacement

Crash Pad Side Cover Replacement

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the crash pad side cover (A).

    Driver's 

    Fig 1: Removing Crash Pad Side Cover (Driver)
    G11817086Courtesy of KIA MOTORS AMERICA, INC.

    Passenger's 

    Fig 2: Removing Crash Pad Side Cover (Passenger)
    G11817087Courtesy of KIA MOTORS AMERICA, INC.
  2. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.