Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Release the residual pressure in fuel line. (Refer to RELEASE RESIDUAL PRESSURE IN FUEL LINE .)
- Lift the vehicle.
- Remove the front side cover (A) and rear side cover (B).
- Disconnect the fuel feed tube hose (A), leveling hose (B) and vapor hose quick-connector C).
- Remove rear muffler. (Refer to MUFFLER .)
- Disconnect the fuel pump & fuel tank pressure sensor extension connector (A).
- After supporting the fuel tank with a jack, remove the fuel tank band (A).
- Disconnect the fuel feed tube quick-connector (A).
- Remove the fuel tank.