LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Control System (HEV)) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
    Fig 1: Locating Purge Control Solenoid Valve Connector And Vapor Hoses
    G11815784Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the valve from the bracket in the direction of the arrow.
Fig 2: Removing Valve From Bracket
G11815785Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals