LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Control System (HEV)) >> NVLD(Natural Vacuum Leakage Detection) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the NVLD connector (A).
  3. Disconnect the ventilation hoses (B, C).
    Fig 1: Locating NVLD Connector And Ventilation Hoses
    G11815795Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the NVLD after by loosening the bolts (A).
Fig 2: Locating NVLD Bolts
G11815796Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals