LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Air Conditioning System (HEV)) >> Evaporator Temperature Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Loosen the mounting screw and then remove the crash pad lower cover (A).
    Fig 1: Loosening Crash Pad Lower Cover Mounting Screw
    G11818476Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction.
    Fig 2: Removing Evaporator Temperature Sensor
    G11818477Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals