LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Air Conditioning System (HEV)) >> Evaporator Temperature Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Ignition "OFF"
  2. Disconnect evaporator temperature sensor.
  3. Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
    Fig 1: Measuring Resistance Between Terminal 1 And 2 Of Evaporator Temperature Sensor Using Multi-Tester
    G11818475Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals