When Installing Connecting Parts
WARNING: This page is about a different variant/trim than selected.
Flange With Guide Pin
Check the new O-ring for damage (use only the specified) and lubricate by using compressor oil. Tighten the nut to specified torque.
AIR CONDITIONING FLANGE TORQUE SPECIFICATIONS
| Size | Tightening torque [N.m (kgf.m, lb.ft)] | |
|---|---|---|
| General bolt, nut | ||
| Bolt(4T), Nut(4T) | Bolt(8T), Nut(6T) | |
| M6 | 4 - 6(0.4 - 0.6, 2.9 - 4.3) | 8 - 12(0.8 - 1.2, 5.7 - 8.6) |
| M8 | 9 - 14 (0.9 - 1.4, 6.5 - | 10) 20 - 30 (2.0 - 3.0, 14 - 21.6) |
| M10 | 19 - 28 (1.9 - 2.8, 13.7 - | 20) 45 - 60 (4.5 - 6.0, 32 - 43.3) |
| Size | Flange bolt, nut | |
| Bolt(4T), Nut(4T) | Bolt(8T), Nut(6T) | |
| M6 | 4 - 6(0.4 - 0.6, 2.9 - 4.3) | 9 - 14 (0.9 - 1.4, 6.5 - 10.1) |
| M8 | 10 - 15 (1.0 - 1.5, 7 - | 10) 22 - 33 (2.2 - 3.3, 15.9 -23.8) |
| M10 | 21 - 31 (2.1 - 3.1, 15 - | 22) 50 - 65 (5.0 - 6.5, 36.1 - 7.0) |
NOTE:
- T means tensile intensity, which is stamped on the head of bolt only numeral.