Door Mirror Turn Signal Lamp

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative (-) battery terminal.
Remove the mirror (C) after disconnecting the heater connector (A) and BSD warning connector (B).

Fig 1: Disconnecting Heater Connector And BSD Warning Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the door mirror housing (A) after loosening the mounting screw.

Fig 2: Removing Door Mirror Housing
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Take care not to damage the mirror holder fixing clip.
Remove the door mirror cover (A) after removing the fixing clip.

Fig 3: Removing Door Mirror Cover After Removing Fixing Clip
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Take care not to damage the mirror cover fixing clip.
Loosen the mounting screw (A).

Fig 4: Loosening Mounting Screw
Courtesy of KIA MOTORS AMERICA, INC.
Remove the door mirror turn signal lamp (B) after disconnecting the connector (A).

Fig 5: Removing Door Mirror Turn Signal Lamp After Disconnecting Connector

Courtesy of KIA MOTORS AMERICA, INC.