Head Lamp (Low)

Standard 

1. Turn the head lamp switch off.
2. Disconnect the power connector from the lamp.
3. Remove the head lamp (Low) cap.
4. Disconnect the connector (A).
5. Turn the bulb and socket (A) counter clockwise to remove the turn signal bulb.
   Fig 1: Turning Bulb And Socket Counter Clockwise

   Courtesy of KIA MOTORS AMERICA, INC.
6. Installation is the reverse of removal.

HID 

1. Turn the head lamp switch off.
2. Disconnect the power connector from the lamp.
3. Remove the head lamp (Low) cap.
4. Remove the ignitor fixed clip (A).
   Fig 1: Removing Igniter Fixed Clip

   Courtesy of KIA MOTORS AMERICA, INC.
5. Remove the ignitor (B) after disconnecting the connector (A).
   Fig 2: Removing Igniter Connector

   Courtesy of KIA MOTORS AMERICA, INC.
6. Installation is the reverse of removal.
   CAUTION: Turn the head lamp switch off to avoid high voltage
   Be careful not to damage the bulb and use genuine bulbs only

   • Do not apply excessive force and fit it correctly.
   • Confirm the bulb locking