LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Heater System (HEV)) >> Heater Hose Pump >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Disconnect the mounting clip, and then remove the air duct hose assembly(A).
    Fig 1: Disconnecting Mounting Clip And Removing Air Duct Hose Assembly
    G11818538Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the intake air filter assembly(A).
    Fig 2: Locating Intake Air Filter Assembly
    G11818539Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the heater hose.

    (Refer to HEATER UNIT .)

  5. Disconnect the connector(A) and then remove the heater hose pump (B).
    Fig 3: Removing Heater Hose Pump
    G11818540Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation in the reverse order of removal.