Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the 12V battery negative (-) cable.
Remove the under cover (A).

Fig 1: Removing Under Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the wiring fixed clip at bracket after removing oil pump connector (A).
Tightening torque:

18.6 ~ 27.5 N.m (1.9 ~ 2.8 kgf.m, 13.7 ~ 20.2 lb-ft)

Fig 2: Removing Oil Pump Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the oil pump unit (A).
Tightening torque:

18.6 ~ 27.6 N.m (1.9 ~ 2.8 kgf.m, 13.7 ~ 20.3 lb-ft)

Fig 3: Removing Oil Pump Unit
Courtesy of KIA MOTORS AMERICA, INC.