Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the 12V battery negative (-) cable.
Remove the under cover (A).
Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 1: Removing Under Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the electric oil pump (EOP) connector (A, B).

Fig 2: Removing Electric Oil Pump Connector A (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Removing Electric Oil Pump Connector B (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the EOP (A) after removing the bolt and nut.
Tightening torque:

42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)

Fig 4: Removing EOP Bolt And Nut
Courtesy of KIA MOTORS AMERICA, INC.