LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Hybrid Motor Cooling System (HEV)) >> Reservoir >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • Be careful not to damage other hose by when tightening the clamp.
    • Install the clamp in the specified direction to prevent interference with surrounding components.
    • Refill the hybrid motor cooling system with coolant and then perform the air bleeding using the GDS.

      (Refer to COOLANT )

    • Confirm the coolant leak or fluid leak from the hose connections part in state of engine start.
scientia non olet · About LEMON Manuals