LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Hybrid Control System (HEV)) >> Clutch Pressure Sensor (CPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the auxiliary 12V battery negative (-) terminal.
  2. Remove the under cover. (Refer to "Engine And Transaxle Assembly .")
  3. Disconnect the sensor connector (A).
    Fig 1: Locating Clutch Pressure Sensor Connector
    G11818668Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the clutch pressure sensor (A).
Fig 2: Locating Clutch Pressure Sensor
G11818669Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals