DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Engine speed is below the target while ISC torque is around the maximum
|
- Intake system restriction
- Vacuum leaks
- Exhaust restriction
- Engine mechanical concern
- Sludged throttle body
- ETC
- ECM
|
| Enable Conditions |
- Vehicle speed 0km (0mph)
- ECT greater than 60°C (140°F)
- Intake air temperature greater than -10.5°C (13.1°F)
- Accel. Pedal 0%
- BARO greater than 74.5kpa (0.74bar/10.80psi)
|
| Threshold Value |
- Difference of Desired engine speed and Actual engine speed greater than 100RPM
- Difference of Max. idle torque and Actual idle torque less than 10Nm
|
| Diagnostic Time |
|
| MIL ON Condition |
|