Repair Procedures: Adjustment: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Make sure to proceed compensate wear procedure referring to table below in case of a dual clutch assembly or a clutch actuator replacement.
| Replacement part | Remedy | |
|---|---|---|
| A | If only 'clutch actuator' has been replaced | Need to rewind rod length |
| B | If only 'double clutch assembly' has been replaced | Need to initialize rod length |
| C | If 'double clutch assembly' and 'clutch actuator' both have been replaced | Need to initialize rod length |