LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima LX >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module & Sensors - Optima (Except HEV) >> Side Impact Sensor (SIS) >> Repair Procedures >> Removal >> Front side pressure sensor

Front side pressure sensor

  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning to work.
  2. Remove the front door trim.

    (Refer to Body (Interior and Exterior) - "FRONT DOOR TRIM ")

  3. Disconnect the Front side pressure sensor connector (B).
  4. Loosen the screw and then remove the front side pressure sensor (A).
Fig 1: Removing Front Side Pressure Sensor
G11824236Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals