LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima LX >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wireless Power Charger Diagnosis - Optima (Except HEV) >> DTC B1602: CAN Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect KDS/GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again?

    YES 

    • Go to applicable troubleshooting procedure.

    NO 

    • Problem is corrected and the system operation performs to specification at this time.
scientia non olet · About LEMON Manuals