LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima Hybrid >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Electric Parking Brake Diagnosis (HEV) >> DTC C2416: Motor Short Or Open - LH >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

  1. Connect GDS to Data Link Connector(DLC).
  2. Ignition "ON".
  3. Monitor "Diagnostic Trouble Codes(DTC)" with GDS.
    Fig 1: Scantool Display - Diagnostic Trouble Code C2416
    G11822384Courtesy of KIA MOTORS AMERICA, INC.
  4. Is DTC status displayed as Present?

    YES 

    • Go to Monitor GDS Data procedure below.

    NO 

    • Fault might be intermittent caused by poor contact in the sensor's and/or ECU's connector or was repaired and ECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification Of Vehicle Repair " procedure.
scientia non olet · About LEMON Manuals