Monitor GDS Data

Connect Data Link Connector(DLC) to GDS.
Check the "Current Data" about related DTC with GDS.

Fig 1: Scantool Display - EPB Lamp Status
Courtesy of KIA MOTORS AMERICA, INC.
Are the parameters displayed correctly?
YES
- Go to Next step procedure.
NO
- Go to Terminal And Connector Inspection procedure below.
Check the "Current Data" about related DTC with GDS(Cluster).
Are the parameters displayed correctly?
YES
- Go to Terminal And Connector Inspection procedure below.
NO
- Repair as necessary and go to "Verification Of Vehicle Repair " procedure.