Repair Procedures: Replacement

Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
Tightening torque:

22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 lb-ft)

Fig 1: Locating Wiper Arm And Caps
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the nozzle hose (B).
Detach the clips, then remove the cowl top cover (A).

Fig 2: Disconnecting Nozzle Hose
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Replace any damaged clips.