LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges (HEV) >> Instrument Cluster >> Repair Procedures >> Inspection >> Fuel Gauge

Fuel Gauge

  1. Disconnect The Fuel Sender Connector From The Fuel Sender.
  2. Connect A 3.4 Watt, 12V Test Bulb To Terminals 1 And 3 On The Wire Harness Side Connector.
  3. Turn The Ignition Switch To The On, And Then Check That The Bulb Lights Up And The Fuel Gauge Needle Moves To Full.
Fig 1: Connecting 12V Test Bulb To Terminals 1 And 3 On Wire Harness Side Connector
G11818048Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals