Repair Procedures: Installation
- Installation is the reverse of removal.
- Use a SST (09581-11000) when installing the brake caliper assembly.
Courtesy of KIA MOTORS AMERICA, INC.
- After installation, bleed the brake system. (Refer to Brake Bleeding Procedure
.
)
CAUTION:
- Do not hit piston end with a hammer or pry against piston face with screwdriver to push in piston.
- Use wood or a used pad to protect piston end. Pushing an the wood or used pad is recommended.
- When spreading a piston, it is best to use SST 09581-11000.